The most effective and direct method to improve the wear resistance of the blade is the titanium plating process - to increase the surface life, increase the hardness, increase the value and improve the wear resistance, corrosion resistance and so on.
After being covered by vacuum coating, the surface of the die can have very low friction coefficient, which can reduce the stress during machining. After vacuum coating, the surface hardness of the strip cutter mold can be increased by 5 to 10 times, which can greatly reduce the surface wear, especially for high precision machining, the excellent surface quality can be obtained. After cold stamping and drawing die are covered by vacuum coating, the friction force can be significantly reduced, and the scratch and wear caused in the process can be significantly reduced. Thus, life can be increased and cost can be greatly reduced.
Address: Bowang Silian Industrial Park, Maanshan City
Telephone: 0555-6762102
Contact: Cheng Kequan cheng Kezhen 13951078648 13965382116
Fax: 0555-6769011
mobile terminal
Official Accounts
Copyright © Maanshan Zhongli Tool Manufacturing Co., LTD. All rights Reserved 皖ICP备11005968号 Technical support：whtime.net 
中文
English